SHOSHONE – The Idaho Transportation Department (ITD) asks drivers in the Shoshone area to plan ahead, as a section of U.S. Route 26 at milepost 165.93 will be closed for railroad repair May 16-18.
The crossing will be closed to motorists starting on Tuesday, May 16 at 6 a.m. and will reopen when work is complete by approximately 6 p.m. on Thursday, May 18. To receive the most current traffic updates, call 511 or sign up at 511.idaho.gov.
Union Pacific Railroad Company will conduct repairs to address the aging infrastructure and includes removing old steel tracks and replacing with new steel tracks, concrete slabs, and asphalt.
Motorists traveling northbound on U.S. Route 93 wishing to proceed toward Shoshone will be detoured west on U.S. Route 26. Those traveling southbound on State Highway 75 wishing to proceed toward Shoshone will be detoured west on U.S. Route 20. The closure and detour will remain for approximately three days until the railroad crossing repairs are completed.
ITD, Idaho State Police, and local law enforcement caution motorists to slow down and pay attention when driving in work zones, where increased speeding fines and other penalties apply. Motorists are encouraged to plan ahead and dial 5-1-1 or visit 511.idaho.gov for information on the state highway or interstate system.
POCATELLO – Beginning this evening at approximately 8:00 p.m. paint crews will be restriping the ramp from I-86 to I-15 southbound. Work will continue through the night and will end at approximately 6:00 am tomorrow. During the restriping work the ramp will be closed and southbound traffic will be detoured through the Northgate Interchange. While it is hoped the work will be completed in one night, there is a possibility the detour will also be used Thursday night to finish striping.
Motorists should carefully follow road signs, obey work zone speed limits, and share the road with other vehicles navigating detours.
POCATELLO – The northwest ramp from I-15 to I-86 reopened this morning at the System Interchange in Pocatello. Traffic heading from I-15 toward Chubbuck and American Falls is no longer detoured through the Northgate Interchange. The detour was needed to lower the ramp so new bridges can be built for I-15 through the System Interchange.
Motorists should carefully follow signs and posted speed limits while travelling through the construction area. With crews working day and night it is especially important that drivers be alert and proceed safely through the work area. Drivers are encouraged to check https://511.idaho.gov or the 511 app to keep track of road conditions and construction. Project details are available on ITD’s projects website — https://itdprojects.org/projects/i-86-i-15-system-interchange/
This project is partially funded with Transportation Expansion and Congestion Mitigation (TECM) funds as part of Governor Little’s Leading Idaho initiative. The program allows ITD to accelerate project timelines to address rapid growth and build critical infrastructure today that would otherwise take many years to fund and build.
POCATELLO – Beginning tonight, Tuesday September 6 at 10:00 p.m., the northwest ramp of the System Interchange at Pocatello will be closed for construction. The closure will allow the ramp to be lowered prior to beginning bridge construction.
Motorists travelling north on I-15 wishing to proceed west on I-86 toward Chubbuck will be detoured through the Northgate Interchange. The closure and detour will remain for approximately three weeks until the new ramp is completed.
Motorists should carefully follow signs and posted speed limits while travelling through the construction area. With crews working day and night it is especially important that drivers be alert and proceed safely through the work area.
Drivers are encouraged to check https://511.idaho.gov or the 511 app to keep track of the project detours. Project details are available here on ITD’s projects website — https://itdprojects.org/projects/i-86-i-15-system-interchange/
This project is partially funded with Transportation Expansion and Congestion Mitigation (TECM) funds as part of Governor Little’s Leading Idaho initiative. The program allows ITD to accelerate project timelines to address rapid growth and build critical infrastructure today that would otherwise take many years to fund and build.
Beginning tomorrow night (Oct. 29) at 10 p.m., a new detour will be in place for motorists heading east on Interstate 84/86 from Burley toward Pocatello. During this time, crews will install new structures to hold overhead signage.
Weather permitting, this temporary traffic pattern is expected to last until 6 a.m. on Wednesday, October 30.
“Unlike previous detours that have been occurring in this area, this portion of construction requires that we direct motorists completely off of the interstate,” said ITD Project Manager Travis Hitchcock. “Directing traffic to Idaho Highway 77 and Idaho Highway 81 will allow for safe installation of the structures without traffic traveling underneath.”
This is part of the Salt Lake Interchange replacement project, underway since May of last year. Construction is scheduled to finish by late 2020.
Drivers should still anticipate reduced speeds through the work zone and pay close attention to signage in place to safely direct motorists through the area.
Wadsworth Brothers Construction, of Draper, Utah is the prime contractor on this project.
Traffic will be detoured Thursday, May 30 for motorists heading eastbound on Interstate 84 from Burley toward Pocatello as crews work to complete girder placement on the newly constructed bridge.
This is part of the Salt Lake Interchange replacement project, underway since May of last year. Construction is scheduled to finish by late 2020.
This temporary traffic pattern is expected to be in effect between the hours of 9 p.m. and 6 a.m. while the girders are placed.
Drivers should still anticipate reduced speeds through the work zone and pay close attention to signage which will be in place to safely direct motorists through the area.
Wadsworth Brothers Construction, of Draper, Utah is the prime contractor on this project.
Interstate 84 will be closed at night between the Franklin Road and Karcher/Midland interchanges April 22-26 while Idaho Power installs a new transmission line across the interstate. A detour will be in place each night between 10 p.m. and 5 a.m.
The detour route will follow Franklin Road (US-20/26) and Midland Road. Please plan ahead and expect delays when traveling in the area. Flaggers will direct traffic.
Idaho Power is installing a new transmission line across I-84. The transmission line will serve the new Skyway Ranch Substation east of the Franklin Road Interchange.
Traffic will be detoured overnight next week for motorists heading eastbound on Interstate 84 from Burley toward Pocatello as crews work to place girders on the newly constructed bridge.
This is part of the Salt Lake Interchange replacement project, underway since May of last year. Construction is scheduled to finish by late 2020.
This temporary traffic pattern is expected to be in effect between the hours of 9 p.m. and 5 a.m. during the nights girders are placed. Work is anticipated to be completed within a week.
“Detouring traffic around this portion of the work zone ensures the safety of motorists who would otherwise be traveling underneath the bridge,” said ITD Project Manager Travis Hitchcock. “Crews will be working to place the girders at night in order to reduce traffic impacts during peak traveling hours.”
Drivers should still anticipate reduced speeds through the work zone and pay close attention to signage which will be in place to safely direct motorists through the area.
Wadsworth Brothers Construction, of Draper, Utah is the prime contractor on this project.
As early as mid-February, US-30 west of Bliss to Interstate 84 will be closed while the Union Pacific Railroad Bridge undergoes replacement. Motorists traveling to Bliss via I-84 will need to use Exit 141.
Construction work will include installment of a new box culvert as well as utility relocation. The new bridge structure will have an increased width to allow for larger vehicles to pass. Approximately 1.5 miles of US-30 will also be reconstructed as part of this project.
Subject to weather conditions, work is expected to be complete this fall. The railroad will continue to be operational throughout construction.
Western Construction, Inc. from Boise is the contractor for this project.
The Idaho Transportation Department is responsible for all highways on the State Highway System – interstates, state highways and U.S. routes. All other roads are under the jurisdiction of the local, city or county entity.
BOISE – Construction is underway on improvements to the Cloverdale Overpass bridge and Cloverdale Road between Franklin Road and Camas Drive.
The Ada County Highway District and the Idaho Transportation Department transportation are joining together to replace and widen the damaged Cloverdale overpass bridge, and widen and improve the sections of road adjoining the bridge. Cloverdale Road will remain closed between Franklin Road and Camas Drive during construction, but one lane of travel in each direction will be open by June 15, 2019. Details of the improvements are listed below.
The public will experience immediate impacts of the construction as crews demolish the damaged bridge over Interstate 84. All eastbound lanes and two westbound lanes of I-84 will be closed overnight Monday (December 3) from 9 PM to 5 AM Tuesday morning. All westbound lanes and two east bound lanes of I-84 will be closed overnight Tuesday (December 4) from 10 PM to 6 AM Wednesday morning. Please refer to the map below for detour routes.
Idaho State Police will increase patrols to promote safe driving behavior in the work zone. The work zone may contain hidden hazards and the public is advised to stay out of the area. Pedestrian and bicycle traffic has been allowed to use the existing Cloverdale Overpass, but following demolition that route will be unavailable.
Throughout construction, access to local businesses and residences on Cloverdale Road will remain open. The work will include, but not be limited to: general construction noise, dust, equipment backup alarms and ground vibration. There may be some night work, but typical work hours on Cloverdale Road will be 7 AM to 8 PM.
This project will construct the following improvements:
Replace and widen the Cloverdale overpass bridge
Widen Cloverdale Road to two travel lanes in each direction with a center turn lane
A raised bike lane, curb, gutter and sidewalk on both sides of the roadway
Install an upgraded pedestrian signal at Emerson Drive and Cloverdale Road